WOOD CHIPPER / MULCHER::
CHIPPER, BC-1000XL

Where to find CHIPPER, BC-1000XL in Austin

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER
Daily: $335.00
Weekly: $1,185.00
Comments:
  • General Dimensions and Weights :
  • Length - Feed Table Up, Tongue In 150 " 381 cm
  • Length - Table Down, Tongue Extended 198 " 502.9 cm
  • Width 66.5 " 168.9 cm
  • Height 101 " 256.5 cm
  • Weight - Engine Option One 4995 lbs 2265.7 kg
  • Tongue Weight - Engine Option One 600 lbs 272.2 kg
  • Engine Option One
  • Make and Model Deutz D2.9L Tier 4 Final
  • Number of Cylinders 4
  • Gross Horsepower (Maximum) 74 hp 55.2 kw
  • Torque (Max) 181 ft-lb 245.4 Nm
  • Fuel Tank Capacity 25 gal 94.6 L
  • Max Fuel Consumption 4.6 gph 17.4 lph
  • Fuel Type Diesel
  • Air Cleaner 2-stage dry with safety element
  • Oil Filter Spin-on
  • Recommended Oil 10W30
  • Oil Volume with Filter 8.4 qt 7.9 L
  • Maximum Angle of Continuous Operation 30 deg
  • Cooling Medium Liquid
  • Coolant Capacity (Engine and Radiator) 13.3 gal 50.3 L
  • Alternator 95 Amp
  • Fan 18.625" (47.3 cm) suction
  • Clutch Type Clutchless PTO
  • Clutch Drive Engagement Belt tensioner
  • Feed System :
  • Feed Roller Orientation Horizontal
  • Number of Feed Rollers 1
  • Feed Roller Clamp Load 350 lbs 158.8 kg
  • Feed Roller Minimum Distance to Drum 1 " 2.5 cm
  • Feed Roller Dimension 20" x 17" (50.8 cm x 43.2 cm)
  • Number of Knives 2
  • Weight of Feed Roller 400 lbs 181.4 kg
  • Number of Feed Roller Motors 1
  • Motor Displacement 28.3
  • Motor Manufacturer White
  • Feed Speed 105 ft/min
  • Infeed Table Width 52 " 132.1 cm
  • Infeed Table Length 32 " 81.3 cm
  • Infeed Hopper Height 12 " 30.5 cm
  • Infeed Throat Capacity 12" H x17" W (30.5 cm H x 43.2 cm W)
  • Pinch Point - Distance to End of Feed Table 66.5 " 168.9 cm
  • Distance from Feed Table to Ground 26 " 66 cm
  • Infeed Table Material Thickness .2 " .5 cm
  • Safety System :
  • Bottom Feed Stop Bar Standard
  • Bottom Feed Stop Bar Diameter 2 " 5.1 cm
  • Bottom Feed Stop Bar Material Thickness 11 GA
  • Actuation Force (BFSB) 34 lbs 15.4 kg
  • Normal Sensitivity 22 deg
  • Reduced Sensitivity 12 deg
  • Reset Method Green hold-to-run button
  • Four Position Feed Control Bar Standard
  • Positions 4: E-stop, forward, neutral and reverse
  • Actuation Force 34 lbs 15.4 kg
  • Green Hold to Run Button Standard
  • Drum/Disc Cutting System :
  • Material Capacity 12 " 30.5 cm
  • Width 20 " 50.8 cm
  • Thickness .4 " 1 cm
  • Diameter 20 " 50.8 cm
  • Speed 2050 rpm
  • Weight With Shaft 460 lbs 208.7 kg
  • Safety Lock - Number of Positions 2
  • Number of Knives 2
  • Knife Thickness .6 " 1.6 cm
  • Material A8 chipper steel
  • Useable Edges 2
  • Knife Size 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm)
  • Number of Bolts/Knife 4
  • Replaceable Threaded Knife Block Yes
  • Number of Paddles 5
  • Fixture Method Weld-on
  • Bedknife Size 3.5" x 17.3" (8.9 cm x 43.8 cm)
  • Bedknife Thickness 1 " 2.5 cm
  • Bedknife Material 1018
  • Bedknife - Number of Useable Edges 4
  • Cutter Drive Components - Engine Option One :
  • Number of Bearings 2
  • Bore 2.4 " 6.1 cm
  • Type Spherical rollers
  • Manufacturer Linkbelt
  • Dynamic Capacity 31400 lbs 14242.8 kg
  • Static Capacity 53500 lbs 24267.2 kg
  • Belt Idler/Tensioner Yes
  • Belt Type 5V
  • Discharge System
  • Chute Height 101 " 256.5 cm
  • Chute Rotation Angle 270 deg
  • Rotation Type Rotation handle with pin lock
  • Rotational Lock Yes
  • Hydraulic System :
  • Tank capacity 7 gal 26.5 L
  • Recommended Oil Type Vermeer VMF
  • System Type Tandem center
  • Filtration Method 10 micron return; 100 micron suction
  • Pump Flow at Maximum RPM 2.7 gpm 10.2 L/min
  • System relief pressure 2500 psi 172.4 bar
  • Flow Control No
  • Directional Control Yes
  • Oil Cooler No
  • Electrical System :
  • System Voltage 12 Volt
  • Battery Group 31; 950 CCA
  • Standard Gauges MFD, hour
  • Switches Feed Stop Bar Sensitivity, Droop, Ecoldle
  • Controller Vermeer ACS
  • Display Multifunctional display (MFD)
  • Shutdown System Yes
  • Chassis :
  • Frame Description 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness
  • Tongue Description 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)
  • Tongue Extension Extendable 24" (61 cm) @ 12" (30.5 cm) increments
  • Hitch Type Pintle
  • Fender Description Bolt-on-steel
  • Axle/Suspension Torsion
  • Type - Option One Rubber torsional
  • Manufacturer - Option One Dexter
  • Capacity - Option One 5200 lb (2358.7 kg)
  • Tires - Option One ST235/80/R16 Load Range E
  • Wheels - Option One 16" (40.6 cm)
  • Axle/Suspension - Option Two Torsion
  • Type - Option Two Rubber torsional
  • Manufacturer - Option Two Dexter
  • Capacity - Option Two 7000 lb (3175.2 kg)
  • Tires - Option Two ST235/80R16 Load Range E
  • Wheels - Option Two 16" x 6" (40.6 cm x 15.2 cm)
  • Brake Type Standard electric or optional hydraulic
  • Trailer Light Type LED
Add of the above items to my quote request
for a period of   day(s)   week(s)  




* Prices are subject to change.

* Please call us for any questions on our chipper bc 1000xl rentals in Austin Texas, serving Round Rock, Georgetown, Pflugerville, Cedar Park, Buda, Kyle TX and surrouding communities.

Serving Austin Texas, West Lake Hills, Rollingwood, Bee Caves, Lake Way, Del Valley, Cedar Valley, Cedar Creek,
Manchaca, Buda, Kyle, Dripping Springs, Pflugerville, Round Rock, Georgetown and surrounding communities
with all your equipment rental, retail equipment sales, supplies, and parts & repair needs

Copyright © 2017 RentalHosting.com

Powered by Point-of Rental Systems™ - Last Update: 10/23/2017 6:16:22 AM